Awesome Tips for Fixing Your Washing Machine

Washing machines are a huge convenience for any family. They make life so much easier by taking care of our clothes, but they can have their issues too. This blog post will give you some great tips on fixing your washing machine if one of these malfunctions arises!


Should I Replace My Washing Machine?

It's difficult and time-consuming to decide when to replace washing machines. It's also a major consideration since washing machines are expensive home appliances that frequently fail to perform an essential household function. Washing machine repairs are sometimes the most cost-effective solution, whereas replacements are typically less expensive.

Impact of Maintenance on Lifespan

Using simple and effective maintenance habits can help you with your repair and replacement costs. Cleaning your washer frequently will make it work better and last longer. Keeping appliances working well will help you use them for longer periods, which means fewer repairs or replacements.

If you turn the water valve often, this may help with reducing dust build-up. If you don't always clean the valve or the parts inside it, there are possible problems with how they move. This maintenance technique can help prevent machinery parts from working too hard by using smaller parts.

What’s Wrong With Washing Machines?

Look for problems with your washing machine. Some are easy to fix, and some are not. If your bathtub is broken, you may need to replace it. A repairman can help you decide what is wrong with the washer and fix it if it is an easy problem.

The Age of Your Washing Machine

Every appliance will last for a while. Appliances might break down at any time, but the washing machine should work for about 11 years. Then it is time to fix it or replace it because performance will probably be much worse than before. Read this point if you are unsure what to do when an appliance breaks.

How to Repair a Washing Machine That Won’t Agitate?

When something goes wrong in your washing machine, it usually is because there is water in the bathing basin. Some agitators make sure clothes get mixed up and move around. If you have a central agitator, the top is connected to the bottom by tiny screws called dog cogs which can sometimes break off.

Reset the Machine

Your washer's motor has spikes and can't work properly. You need to press a button that will reset the motor. The reset button is different for each machine in your manual. To get yours to work, you must unplug the machine from the power cord, plug it back in, lift up and lower the lid twice.

Test the Function of the Cogs

If the machine is making loud sounds, open the lid. If the sound stops, close it again. A grind or noise means that there might be something wrong with the cogs inside.

How Old Is the Washing Machine?

The average expected lifespan of washroom equipment is 10 years. Some of these may last longer, while others may fail sooner or later. How much time you spend with the equipment impacts how long you spend. If your current device is relatively recent, replacing it could be worthwhile.

Appliance Repair Company Costs

Your washer might not work in the future, no matter how old it is. An experienced technician can find the problem for you. If you decide to fix your washing machine, it is better to use a fixed cost. It's also important to look at replacement parts and labor costs, finding out what is best for your budget.


If a washing machine does not work, fixing it can be very expensive. Sometimes the parts will break even after they are repaired. You should buy a new washing machine if the total cost of repairing it is more than 5% of the cost of a new appliance. Be sure to read your warranty when you buy or repair your washing machine so that you do not get stuck with all the costs.

Fixing a Washing Machine Making Loud Noises

A more frustrating problem with washing front-loading machines is making loud humming noises. When the machine moves, it can cause damage and break your washer.

Check the Belts

Washers and dryers can lose their belt drive system. It involves repairs where it takes a considerable amount of time to get into the motors. A pump pulley belt may crack. In many situations, the belt smells as if burning rubber.

Consider Lubricating or Replacing Tub Bearings

The part that helps support your bathtub may wear down. When you use the washer or dryer, it might make a grinding noise. That is because the tub bearing needs to be cleaned or replaced.

Troubleshooting a Washing Machine That Isn’t Cleaning Your Clothes

When you wash your clothes, sometimes the dirt and crumbs come off. But other times, they don't. This can be an issue if you can't see them after washing your garments in the washing machine.

Adjust the Detergent

Avoid using too much soap and detergent when washing clothes. Too much soap will be left on clothes that have not yet been removed. Wash pet clothes separately from other clothes. When you wash your pets, make sure to clean the bathroom after you are done!

Check for Overloading

Do not overload the washing machine. If you put a lot of clothes in, it will not clean them well. It takes too long to take the soap and dirt out of these clothes. The owner's manual can tell you how many pieces of clothing are safe to put in at one time.

Make Sure the Water Drains Properly, and There Are No Obstructions

The washing machine is being drained, but the basin does not rotate. If a spinning basin didn't spin, it would be hard for water to evaporate in the garment and dry in a dryer.

Redistribute the Clothing

If your washing machine does not balance, it will stop. Do not put clothes in the washing machine if it is broken. Then remove the cover. The machine should start spinning automatically after loading properly. Like towels and sheets, heavy loads can be distorted with this method.

Make Sure the Machine Is Level

Every machine has a height. The machine won't move if you have it set to that height. You can see how high the height is by looking for bubbles in the water. If the bubbles are too high, you need to lower the level of something so there is more room under your machine.

Ensure Proper Drainage

Make sure the water drains properly, and there are no obstructions. If something is blocking the water flow, it may not drain properly. To check this, you can look in the washing machine without removing anything. You can also check if a pipe connecting back into a drain hose is blocked by small items.

Safety Considerations

Never disconnect the washing machine when doing repairs. The entire machine is very heavy and might fall over. Do not tilt it or move anything else while you fix it.

Troubleshooting a Washing Machine That Won’t Start

If your machine does not start, put clothes inside the washer. Turn off the button.

Check the License

Your washer latching lid switch can cause a fault. This area in the doorframe communicates with the machine that the door was properly opened. Close the door and check if it is connected to anything. You might have to put them together differently, but when using your top loaders, make sure you test the lid before turning it off. So water doesn't come out of it because of an electrical problem.

Make Sure the Machine Is Plugged In

Check the connection on top of your washer to make sure it is plugged in. It can be hard to plug it in because the washer moves around. If anything is moving, they can disconnect wires or cords. Make sure you have a cord that has no give, so it doesn't get twisted by the washer.

For more information on how to repair your washing machine, click here.

Frequently Asked Questions About Fixing Washing Machines

Is It Worth Fixing a Washing Machine?

Compared to new washing machines, old ones do not break down as often. They are also cheaper to repair. Replacement components for older versions may be easier to come by than newer models. When the cost of fixing your machine is less than half that of purchasing a new one, it is the optimum time to do it.

Why Would a Washing Machine Stop Working?

If the washer's water-level switch timer is broken, it might not know when to stop filling with water. This could cause leaks in the pipes.

What Causes the Washing Machine to Stop Working?

Some clothes may have fallen out of the lock. The washing machine has a computer error. If your washer has problems draining water, the doors can lock, or it can fill up with water.

What Is the Average Cost of Washing Machine Repair?

Typical home repair costs are $150-300. You can replace a water leak or switch for about $200. And most homes have washers that you can fix in less than 10 minutes!

Why Would a Washing Machine Just Stop Working?

Check the fuse or circuit breaker to see if it is broken. If not, see if the delay-start feature is enabled or if the controls are locked. A washroom reset is occasionally triggered when you open or close a door.